First Time Buyers guide to AEKU disposable range (starter) (2.5 ml)
AEKU disposable range advice for Cambodia, covering how to use, what to look for and where the trade-offs actually sit.
Most Cambodia buyers start with a well-known brand name and then discover that fit and coil availability matter far more. We would pair the Innokin Sceptre with a 35:65 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
The Cambodia market for aeku disposable range has grown steadily, and the choice on offer now is genuinely broad. Expect roughly 1345 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
We would pair the Innokin Sceptre with a 35:65 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.2 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 35:65 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The build quality on Innokin Sceptre is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 35:65 PG/VG liquid sitting in the chamber. The Deep Purple finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Flavour tracking stays consistent from the first day to roughly the 1.2 Ω mesh mark before the profile flattens and a swap makes sense. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 28 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. In Cambodia, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
The throat hit is noticeably firmer than a 35:65 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Cambodia shifts with import duty, so the figures here reflect current KHR rates rather than a fixed list price. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Specifications
Every unit in the Innokin Sceptre family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | RELX |
| Battery capacity | 1200 mAh |
| Power range | 120 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 35:65 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | anodised aluminium |
| Charge port | USB-C |
| Connector | magnetic contact |
| Airflow | dual bottom |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Coconut Pineapple: creamy, tropical, described as smooth coconut layered over pineapple. On a 35:65 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Cambodia
Availability in Cambodia is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the USB-C are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and KHR rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.